 |
 |
 |
 |
 |
 |
 |
“OEM Superior” channel valve replacement parts : |
|
 |
|
|
|
Precision
forming and lapping insures better sealing in the valve assembly.
Exclusive Aeroflon design improves life. Aeroflon channels have
an increased radius between the channel flat and wall, reducing
metal fatigue and stresses inherent from the forming process. |
|
|
|
Highest
quality sintered or machined alloys. Precision formed to exacting
tolerances that assure proper motion of the channels in your valves.
These highest quality guides can significantly improve your compressor
valve life. |
|
|
|
Nodular
iron castings are carefully in-house heat treated to desired properties
for each application to insure maximum strength, wear and impact
resistances. Special alloys and machined steels are available. |
|
|
|
Aeroflon
offers a complete line of channel valves designed for all types
of reciprocating compressors; pressures to 1500 psi, speeds to 1200
rpm and all types of gases. Maximum flow area is utilized while
perfect sealing is insured. |
|
|
|
Highest
quality gaskets to provide long and trouble free service are available
in steel or copper shrouded asbestos, solid Armco iron, solid aluminum
or solid copper. |
|
|
|
TFE
“self lubricating” inserts and metal guide holders are
durable for long and dependable service with high efficiency operation. |
|
|
|
Top
quality glass fiber laminate wear strips are designed for long service
under the most severe, non-lubricated conditions. |
|
|
|
Edge
radiused springs are formed from 301, 410 and Inconel 600 stainless
steels. Aeroflon quality control assures each spring has the proper
arch and length. Each spring is preset, thus assuring proper tension.
Radiused edges prevent “hanging” in the open position
due to binding between the channel and spring. |
|
|
|
316,
410 stainless and other special order steels are heat treated then
ground or machine lapped on request. Aeroflon seat plates assure
the best possible valve efficiency from perfect sealing, when used
with superior Aeroflon channels are springs. |
|
|
|
Pioneered
by Aeroflon, this prepackaged single part number contains all parts
needed to completely renew any particular valve to like new condition.
Inventory is simplified, maintenance gets all the right parts for
the valve in one prepackaged convenient set. |
|
|
|
Precision-formed
stainless steel pins provide a good interference fit and are engineered
for proper ductility to allow for adjustment of the valve guides
without embitterment of the pin. |
|
| Copyright 2007-2008
www.aeroflon.com Powered by Real Time Solutions |
Home | Profile | Quality | Feedback |Sitemap | Contact us |
